EMF Solutions iCell Chip (For iPhones 12,13, 14)
For iPhone models 12 & 13 (& other “MagSafe” iPhones)
The regular "Cell Chip" is for all other cell phones.
Works better than any other on the market or your money back guarantee kicks in.
Dimension: 3.0″ x 1.0″ x 0.17″
DO I NEED THE "CELL CHIP" OR "iCELL CHIP"?
The new "MagSafe" iPhone 12 & 13 models contain new technology and must use this Chip (not the regular "Cell Chip"). Any other future model iPhones (or if any other brands start using magnetic technology in their phones) then those phones would also need the "iCell Chip". All other cell phone models should use the regular "Cell Chip". Both chips work on both phones BUT using the correct chip is significantly more effective.
iCell Chips require almost twice the amount of a totally different raw material and therefore these are THICKER than the regular Cell Chips.
An average cell phone now measures well over 100 times what is considered safe by expert scientists (the over 4,000 studies at the BioInitiative.org). Phones usually measure well over 2,000 microwatt/m2 as soon as you turn them on…the "safe" levels determined at the BioInitiative are UNDER 30 mW/m2!
NOTE: This product will never be perfect looking but is near perfect performing. Here’s why: All resin-made products by EMF Solutions, including this one, are imperfect looking because of a safer, less toxic, plant based resin that takes 3 long days to dry (as opposed to the chemical based resins which take minutes to dry). The dry resin isn’t perfect looking but we sacrifice looks for health and performance.
We suggest using clear packing tape to hold chip in place (may be included in package) then putting the case over it. Also do NOT use a Bluetooth headset which is not able to be fully remediated. We suggest instead using a wired headset.
DO NOT USE WITH CORDLESS CHARGERS - they could possibly heat up the metal circular discs (which looks like pennies) in our product.
DO NOT USE WITH A METAL PLATE MAGNETIC CELL PHONE HOLDER.